- 3rd Generation Intel® Atom Dual Core D2550
- Supports Dual Independent Displays
- Dual Gigabit LAN with Enhanced Surge Protection
- 12V DC jack on back panel for external power supply
- 24-bit Single Channel LVDS
- ECO-design for EuP/ErP

Specification
Jetway NC9NDL Mini-ITX Motherboard
Processor3rd Generation Intel® Atom Dual Core D2550 (1.86GHz@10W)
* Includes optional 40mm CPU Fan in box
ChipsetIntel NM10
Memory2 x 204-pin DDR3-800/1066 SO-DIMM slot up to 4 GB
GraphicsPowerVR SGX 545 (GMA 3650@640MHz) Integrated Graphics for D2550
AudioRealtek ALC662 5.1 Channel Audio
LAN2 x Realtek RTL8111EVL PCI-E Gigabit Ethernet
Storage2 x SATA2 3Gb/s Port
Super IOFINTEK F71869A
Back Panel Connectors
1 12V DC-in Jack
2 Serial Port (RS232)
1 HDMI
1 VGA (D-Sub)
4 USB 2.0
2 RJ45 LAN (10/100/1000)
3 3.5mm Audio with S/PDIF out

Onboard I/O Connectors
1 PCI Slot
1 PCI Express Mini Card Slot (full-size or half-size)
2 SATA2 3Gb/s Connectors
2 USB Pin Headers for up to 3 additional USB 2.0 Ports
4 Serial Headers (3 * RS232, 1 * RS232/422/485)
1 32-pin 24-bit single channel LVDS header/inverter (PowerVR SGX 545 chipset)
1 PS2 Keyboard/Mouse header
2 2-pin LAN LED header
1 GPIO header
1 9-pin Audio header
1 Front Panel header
3 Fan header
1 4-pin 12V ATX Power Connector for alternate internal power supply
1 4-pin Molex Power Output (Male)
Power Supply for NC9NDL
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
Internal Power Supply – the board can, alternatively, be powered by an internal ATX12V 2 x 2 power connector.
Based on power consumption test results, the recommended power rating is 60 W (12 V/5 A).

Caution: There is no isolation circuitry between the external 12 VDC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 12 VDC jack is covered if the internal 2 x 2 power connector is to be used.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
Ordering Info
Part Number Description
JNC9NDL-2550 Mini-ITX motherboard with Atom D2550
F04-289-F (Incl) IO shield for JNC9NDL
G01-SATA-BK-B-F (Incl) SATA2 cable
G01-COM9-30A-F (Incl) COM cable 30cm
G02-DVD5-F (Incl) DVD driver disk
G01-PW4PS-2S-32F (Incl) Y power cable
F07-FN4010BHXH-F (Incl) Optional cooling fan
Downloads
NC9NDL BIOS A06 Release Date 2013-11-14
Description Improve 800x480 18-bit stability.
Download  BC9NAA06.zip
Installation Instructions 1. Prepare a MS-DOS bootable USB flash drive.
2. Download the zip file.
3. Unzip the file and copy to the USB flash drive.
4. Reboot the PC into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A05]. Add 800x480 24-bit option.
[A04]. Add 640x480 and 800x480 options.
[A03]. Improve AC Loss Always On function.
[A02]. Add "load default" option.
[A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for NC9NDL
  Windows 7 (32 bit)
Chipset  intelinf.zip
VGA  cidarview.zip
Sound  alchd_full.zip
LAN  rtllan.zip
Manual
1.0  NC9N-F.pdf
Resources
FCC  FCC
CE  CE
RoHS  RoHS
Power Consumption Repoert  Power Consumption Repoert
Temperature Test Report  Temperature Test Report
GPIO sample code  GPIO sample code
Watchdog sample code  Watchdog sample code