| Jetway NF95A Ultra Low Profile Mini-ITX Motherboard |
| Processor | Atom N270 @ 2.5W (512K Cache, 1.60 GHz, 533 MHz FSB) |
| Chipset | Intel 945GSE + ICH7M @ 11.8W |
| Memory | 1 x DDR2 400/533 SO-DIMM slot (up to 2 GB) |
| Graphics | Intel GMA950 Integrated Graphics |
| Audio | Realtek ALC662 5.1 Channel Audio |
| LAN | Realtek RTL8111DL PCI-E Gigabit Ethernet |
| Storage | 2 x SATA2 3Gb/s ports
1 x PATA IDE port (44-pin mobile header)
*ATA-66 and ATA-100 are faster timings and require a specialized cable to reduce reflections, noise, and inductive coupling. |
| Features | - Ultra slim, low-power, thin form factor design (board z-height is 20mm)
- ECO-design for EuP Standard
- 12 VDC jack on back panel for external power supply
- ATX12V 2 x 2 power connector for alternate internal power supply
- Mini PCI-E Power VCC 3.3V Dual / VCC 3.3V selectable
- Support 24-bit and 18-bit LVDS
- LVDS VCC 5V / 3.3V selectable
- Inverter VCC 5V / 12V selectable |
| Back Panel Connectors |
1 12V DC Jack
1 VGA
1 COM
3 USB 2.0
1 RJ45 LAN (10/100/1000)
1 3.5mm Audio with S/PDIF out
|
| Onboard I/O Connectors |
1 PCI Slot
1 mini PCI-E Slot
2 Serial header (RS232)
1 Serial header (RS232/422/485)
1 44-pin IDE header (UDMA 33/66/100)
2 SATA2 3Gb/s Connectors
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 Parallel header
1 32-pin 24-bit dual channel LVDS header/inverter (CHRONTEL CH7308B chipset)
1 32-pin 18-bit dual channel LVDS header/inverter (INTEL 945GSE chipset)
1 GPIO header
1 9-pin Audio header
1 Keyboard/Mouse header
1 4-pin 12V ATX Power Connector for alternate internal power supply
1 4-pin Power out header
1 Front Panel header
3 Fan header
|
| Power Supply for NF95A |
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
Internal Power Supply – the board can, alternatively, be powered by an internal ATX12V 2 x 2 power connector.
Based on power consumption test results, the recommended power rating is 60 W (12 V/5 A).
Caution: There is no isolation circuitry between the external 12 VDC jack and the internal 2 x 2 power connector. It is the system integrator’s responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 12 VDC jack is covered if the internal 2 x 2 power connector is to be used.
|
| Market Segments Supported |
|
Digital Security & Surveillance
Digital Signage
Gaming
Industrial Automation/Control
Medical
Retail (POS/Kiosk/ATM)
Networking/Storage Server/Mail Server/Print Server
Thin Client
Slim Nettop
|
![[Click to enlarge image]](http://www.jetwaycomputer.com/images/nf95-1.jpg){kind=link}
