- Intel Celeron N2930 SoC Processor
- Embedded Long-life Series, Lifecycle through Q1'2029
- Supports DDR3L-1333 1.35V SODIMM up to 8GB Total
- Supports Jetway Daughter Board Gen2
- ECO-design for EuP/ErP

Model No.   JBC150F9N-2930-B
Part No.   HBJC150F9N-2930-B
Motherboard Specification
CPU Intel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
Memory 2 x 204-pin SODIMM DDR3L-1333 Single Channel up to 8 GB (1.35V required)
Graphics Intel HD Graphics, 313MHz - 854MHz
LAN 1 x Intel i211AT Gigabit Ethernet
Audio Realtek ALC662 HD Audio codec
Storage 2 x SATA2 3Gb/s Connectors
1 x Full-size mSATA slot (shares with 2nd SATA port)
Wireless / Mini-PCIE Slot 1 * Mini-PCI Express Slot (Full-size)
Expansion Slot 1 x PCI Express x1 Slot
USB Embedded 1 * USB 3.0 & 7 * USB 2.0
MB Form Factor Mini-ITX (170mm x 170mm)
Chassis Specification
Form Factor 1U Rackmount
Dimensions 430 (W) * 252 (D) * 44 (H) mm
Storage 1 * 3.5" HDD Drive Bay OR
2 * 2.5" HDD Drive Bay
Front I/O Port 1 * Power Button
1 * Reset Button
1 * Power LED
2 * USB 2.0 ports
Rear I/O Port 1 * Power Switch
1 * Reset Switch
1 * Power LED
1 * PS2 Keyboard
1 * PS2 Mouse
1 * VGA Port
1 * RS232 Serial Port
3 * USB 2.0 ports
1 * RJ45 Gigabit LAN
1 * HDMI (up to 1920 x 1080)
1 * USB 3.0 ports
1 * Line-out Jack
1U Power Supply 1U-200W / Support PFC / 150(L) * 81.5(W) * 40.5(H) mm (FLEX)
Cooling Fans 4020 FAN * 3 / 7000 rpm / DC-12V-0.1A / 8 CFM
Expansion Slots 1 * PCI-E x1 Slot
Environment Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 70°C
Certificate CE,FCC,ErP for Rackmount Barebone
CE,FCC,UL,CCC,RoHS,CISPR 22 CLASS B,UL60950-1,TUV EN 60950-1,CB for Power Supply
Ordering Info
Part Number Description
HBJC150F9N-2930-B 1U Rackmount Barebone
HBJC150F9N-2930BE 1U Rackmount Barebone with 5 LAN Installed
JNF9N-2930 (Incl) Mini ITX Motherboard
HBSPS200W-ST-F (Incl) 200W ST-200UAE 1U FLEX power
HBSPS200W-SS-F (Alt) 200W SS-200 SU Active PFC 1U FLEX power
G01-USB2x5A-150-F (Incl) USB cable for Front USB ports
HBSPCUS-F (Incl) Power Cord
LCSCHBJC3XX-F (Incl) Screw pack
Daughter Board Support

Daughter Boards Gen. 2





Ethernet Ports


- Jetway Daughter Boards Gen2
- 4 additional 10/100/1000Mbps Gigabit Ethernet Port
- Intel 82574L Gigabit Ethernet Controller
- Support Wake-up Event (APM and ACPI 2.0)
- RoHS Compliant



- Jetway Daughter Boards Gen2
- 4 additional 10/100/1000Mbps Gigabit Ethernet Ports
- Realtek RTL8111F Gigabit Ethernet Controller
- Wake-on-LAN and remote wake-up support
- RoHS Compliant


JBC150F9N BIOS A01 Release Date 2014-10-30
Description Initial BIOS.
Download  BF9NAA01.zip
Installation Instructions 1. Prepare a MS-DOS bootable flash drive.
2. Download the zip file.
3. Unzip the file and copy to the flash drive.
4. Reboot the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.

Drivers for JBC150F9N
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit)
Chipset  intelinf.zip  intelinf.zip
VGA  7_32_bit / 7_64_bit  8_32_bit / 8_64_bit
Sound  alchd_full.zip  alchd_full.zip
LAN  intellan187.rar  intellan187.rar
USB 3.0  usb30.zip  usb30.zip
TXE (Trusted Execution Engine)  txe.zip  txe.zip
Chassis Quick Installation Guide  G03-JC150QIG01-F.jpg
Motherboard Manual  NF9N-F.zip
Power Consumption Report  NF9N-2930 Power Consumption Report
Temperature Test Report  NF9N-2930 Temperature Test Report
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux