- Intel Celeron N2930 SoC Processor
- Embedded Long-life Series, Lifecycle through Q1'2019
- Supports DDR3L-1333 1.35V SODIMM up to 8GB Total
- Supports Jetway Daughter Board Gen2
- Up to 2 Displays via HDMI, VGA Video Outputs
- ECO-design for EuP/ErP

Model No. JBC200F9N-2930-B
Part No. HBJC200F9N-2930-B
Motherboard Specification
CPU Intel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
Memory 2 x 204-pin SODIMM DDR3L-1333 Single Channel up to 8 GB (1.35V required)
VGA Intel HD Graphics, 313MHz - 854MHz
LAN 1 x Intel i211AT Gigabit Ethernet
Audio Realtek ALC662 5.1 Channel HD Audio with 3W Amplifier
Storage 2 x SATA2 3Gb/s Connectors
1 x Full-size mSATA slot
Mini-PCIE Slot 1 x PCI Express Mini Card Slot (Full-size)
USB Embedded 1 x USB 3.0 & 5 x USB 2.0
Form Factor Mini-ITX Form Factor, 170 x 170mm
Chassis Specification
Product size 210(W) x 258(D) x 65(H)mm
Color Black
Chassis Bays 1 x Slim Optical Drive Bay
1 x 2.5" Hard Disk Drive Bay
Additional 2.5” drive can be installed if optical drive and mSATA are not installed
System Fan Side: 6cm Fan SLEEVE x 1
Front I/O Port 1 x Power Button
2 x USB 2.0
Rear I/O Port 1 x PS2 Keyboard
1 x PS2 Mouse
1 x VGA
1 x RS232 COM Port
3 x USB 2.0
1 x RJ45 LAN (10/100/1000)
1 x +12 DC-in jack
1 x HDMI
1 x USB 3.0
1 x 3.5mm Audio Jacks (Line Out)
Power Source 12V DC Power-On-Board
Expansion Slots 1 x Full-size mini PCI Express x1 Slot (open)
1 x Jetway Daughter Board Gen2 Connector (open)
Standard Accessory √ 60W AC-DC Adapter x1
√ Power Cord x1
√ Vertical Stand x4
√ CD Disk x1
√ Manual x1
√ Screw Pack x1
√ HDD SATA Cable x1
Certificate CE,FCC,ErP For Barebone
CE,FCC,TUV,UL,CCC,CB,ErP For Power Adapter
Ordering Info
Part Number Description
HBJC200F9N-2930-B Barebone in Black
JNF9N-2930 ITX Motherboard
HCS200PST-B-F (Incl) Vertical Stand
G01-SATA-BK-1-F (Incl) SATA2 cable
G02-DVD5-F (Incl) DVD driver disk
L01AS024-F (Incl) Adapter 12V 5A 60W LEVEL5
JAD12VC-200-LF (Incl) 12V power board
Daughter Board Support

Daughter Boards Gen 2





Serial Ports


- Jetway Daughter Boards Gen2
- Support 2-port 232
- Support 2-port 232/422/485
- TPM 1.2 Header
- RoHS Compliant


Ethernet Ports


- Jetway Daughter Boards Gen2
- 4 additional 10/100/1000Mbps Gigabit Ethernet Port
- Intel 82574L Gigabit Ethernet Controller
- Support Wake-up Event (APM and ACPI 2.0)
- RoHS Compliant



- Jetway Daughter Boards Gen2
- 4 additional 10/100/1000Mbps Gigabit Ethernet Ports
- Realtek RTL8111F Gigabit Ethernet Controller
- Wake-on-LAN and remote wake-up support
- RoHS Compliant


JBC200F9N-2930 BIOS A01 Release Date 2014-10-30
Description Initial BIOS.
Download  BF9NAA01.zip
Installation Instructions 1. Prepare a MS-DOS bootable flash drive.
2. Download the zip file.
3. Unzip the file and copy to the flash drive.
4. Reboot the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.

Drivers for JBC200F9N-2930
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit)
Chipset  intelinf.zip  intelinf.zip
VGA  7_32_bit / 7_64_bit  8_32_bit / 8_64_bit
Sound  alchd_full.zip  alchd_full.zip
LAN  intellan187.rar  intellan187.rar
USB 3.0  usb30.zip  usb30.zip
TXE (Trusted Execution Engine)  txe.zip  txe.zip
1.0  NF9N-F.zip
Power Consumption Report  NF9N-2930 Power Consumption Report
Temperature Test Report  NF9N-2930 Temperature Test Report
GPIO sample code  GPIO sample code
Watchdog sample code  Watchdog sample code