- Intel® Elkhart Lake Celeron® J and N Series SoC Processor
- Long-Life Embedded Class with Planned Lifecycle Through Q1'2036
- 2 * DDR4-3200MHz Dual Channel SO-DIMM up to 32GB
- Up to 2 * 4K HDMI, 1 * 4K eDP or 1 * 1080p LVDS
- 1 * Intel i225-LM 2.5GbE, 1 * Intel i211-AT GbE
- M.2 PCIE 3.0 NVME, 3 * USB 3.2 Gen2, 2 * Serial
- ECO-design for EuP/ErP

Specification
Model SeriesMF04
Part NumberMF04-03MF04-07MF04-33MF04-37
Form Factor3.5" SBC (148 x 102mm)
ProcessorIntel® Celeron J6412, 2.00GHz – 2.60GHz Burst, 4-Core 4-Thread, 10W TDP with flat silver aluminum heatsinkIntel® Celeron N6210, 1.20GHz – 2.60GHz Burst, 2-Core 2-Thread, 6.5W TDP with flat silver aluminum heatsink
Memory2 x 260-pin Dual Channel DDR4-3200 SO-DIMM up to 32GB Total
GraphicsIntel® UHD Graphics for 10th Gen Intel® Processors
AudioRealtek ALC662 HD Audio
LAN1 x Intel I225-LM PCIe 2.5GbE
1 x Intel I211-AT PCIe Gigabit LAN
Storage1 x SATA3 6Gb/s
1 x M.2 (SATA & PCIe 3.0 x2, M-key, 2242/2280 NVMe)
Onboard 32GB eMMC
Super IOFINTEK F81962D
TPMIntel fTPM 2.0 (PTT) Intel fTPM 2.0 (PTT)
Onboard NUVOTON TPM v2.0
Intel fTPM 2.0 (PTT) Intel fTPM 2.0 (PTT)
Onboard NUVOTON TPM v2.0
Back Panel Connectors
1 3.5mm Line-out & MIC-in Audio Jack
2 HDMI 2.0b (4096 * 2160 @ 60Hz)
3 USB 3.2 Gen 2 (10 Gb/s)
3 USB 2.0
1 RJ45 LAN (10/100/1000/2500)
1 RJ45 LAN (10/100/1000)
1 +12V – 24V 2.5mm Diameter DC Power Jack
1 Micro SIM Card Slot (Front)

Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 M.2 M-Key, 2242/2280 (SATA & PCIe 3.0 x2 NVMe)
1 M.2 E-key, 2230 (USB and PCIe for WiFi)
1 M.2 B-key, 3042 (USB for SIM)
2 Serial Headers (1 * RS232, 1 * RS232/422/485)
1 USB Pin Headers for 2 additional USB 2.0 Ports
1 40-pin eDP (4096 * 2160 @ 60Hz)
1 24-bit Dual Channel LVDS/Inverter (1920 * 1080 @ 60Hz)
1 8 bit GPIO Header
1 9-pin Front Audio Header
1 4-pin SMBUS Header
1 4-pin Fan Header
1 AT/ATX Mode Jumper
1 4-pin SATA Power Output (Male)
1 2-pin +12V – 24V Alternate Power-In (Mating plug: JST VHR-2N or TE 1-1123722-2)
Power Supply for MF04
External Power Supply – the board can be powered with a +12 - 24V external power supply though a DC connector on the back panel. The rear +12 - 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 - 24V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12 - 24V 2-pin power connector, where pin 1 is +12 - 24V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12 - 24V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12 - 24V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Industrial PC
√ Factory Automation
√ Retail (POS/Kiosk/ATM/Digital Signage)
√ Digital Security / Surveillance
√ Panel PC
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -40 ~ 85°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
Ordering Info
Part Number Description
MF04-03 Celeron J6412 3.5" SBC
MF04-07 Celeron J6412 3.5" SBC with onboard TPM 2.0
MF04-33 Celeron N6210 3.5" SBC
MF04-37 Celeron N6210 3.5" SBC with onboard TPM 2.0
G01-COM-H2M22-1F (Incl) COM cable
OS Support List
Windows Linux
Windows 10 64bit CentOS 8.2_2004
Win 10 IoT Enterprise 64-bit RedHat 8.2
Fedora 33.1.2
OpenSUSE 15.2
Ubuntu 20.04.1
Downloads
MF04 BIOS A01 Release Date 2021
Description Initial for Production.
Download  #
Flash Instructions for UEFI 1. Unzip the file and copy to the USB flash drive with FAT32 format.
2. Insert the USB drive, Enter BIOS, and select "Built-in EFI Shell" from Boot Override.
3. Type fs0: to change path when you see Shell prompt.
4. Type *.NSH to auto update BIOS.
5. Power off the system after the update finished.
* Read Detailed Instructions in PDF
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for MF04
  Windows 10 (64 bit)
Chipset  inf_ehl.zip
Graphic  gfx_ehl.zip
Sound  audio_ehl.zip
LAN  intellan_ehl.zip
SIO  sio_ehl.zip
ME  ime_ehl.zip
Manual
1.0  G03-MF04-F.pdf
Resources
FCC  FCC
CE  CE
LVD  LVD
RoHS  RoHS
Power Consumption Report  Reports available upon request
Temperature Test Report  Reports available upon request
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux