- Intel Apollo Lake Celeron J3455 Processor 10W
- Long-Life Embedded Class with Planned Lifecycle Through Q3'2031
- Supports up to 3 display, 2 HDMI, eDP, or LVDS
- 1 * Intel i225-LM 2.5GbE, 1 * Intel i219-LM GbE
- Built-in Wide 9-36V DC Power Input, SIM Slot, Serial
- Onboard 32GB eMMC, 2 * M.2 PCIe, 1 * M.2 SATA
- ECO-design for EuP/ErP

Model SeriesMF06
Part NumberMF06-03MF06-07
Form Factor3.5" SBC (148 x 102mm)
ProcessorIntel® Celeron J3455 Quad Core 1.50 GHz - 2.30 GHz, 10W TDP (Formerly Apollo Lake)
* Ships with flat silver aluminum heatsink for direct attaching to a surface
Memory1 x 204-pin DDR3L-1866 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics 500, 250MHz - 750MHz
AudioRealtek ALC897 or ALC888 HD Audio
LAN1 x Intel I225-LM PCIe 2.5GbE
1 x Intel I211-AT PCIe Gigabit LAN
Storage1 x 32GB eMMC
1 x SATA3 6Gb/s
1 x M.2 (SATA, M-key, 2242/2280)
Super IOFINTEK F81962D
TPMIntel fTPM 2.0 (PTT) Trusted Computing FirmwareIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard NUVOTON TPM v2.0
Back Panel Connectors
1 3.5mm Line-out & MIC-in Audio Jack
2 HDMI 1.4b (3840 * 2160 @ 30Hz)
3 USB 3.2 Gen 1 (5 Gb/s)
3 USB 2.0
1 RJ45 LAN (10/100/1000/2500)
1 RJ45 LAN (10/100/1000)
1 +9V – 36V 2.5mm Diameter DC Power Jack

Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 M.2 M-Key, 2242/2280 (SATA only)
1 M.2 E-key, 2230 (USB and PCIe for WiFi)
1 M.2 B-key, 3042 (USB and PCIe) with Micro SIM Slot
2 Serial Headers (1 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for 4 additional USB 2.0 Ports
1 40-pin eDP (4096 * 2304 @ 60Hz)
1 24-bit Dual Channel LVDS/Inverter (1920 * 1080 @ 60Hz)
1 8 bit GPIO Header
1 4-pin SMBUS Header
1 4-pin Fan Header
1 AT/ATX Mode Jumper
1 4-pin SATA Power Output (Male)
1 2-pin +9-36V Alternate DC-in (Mating plug: JST VHR-2N or TE 1-1123722-2)
Power Supply for MF06
External Power Supply – the board can be powered with a +9 - 36V external power supply though a DC connector on the back panel. The rear +9 - 36V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9 - 36V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9 - 36V 2-pin power connector, where pin 1 is +9 - 36V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +9 - 36V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9 - 36V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Industrial PC
√ Factory Automation
√ Retail (POS/Kiosk/ATM/Digital Signage)
√ Digital Security / Surveillance
√ Panel PC
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
Ordering Info
Part Number Description
MF06-03 Intel Celeron J3455 3.5" SBC
MF06-07 Intel Celeron J3455 3.5" SBC with onboard TPM 2.0
OS Support List
Windows Linux
Windows 10 64bit CentOS 7
Win 10 IoT Enterprise 64-bit Debian 9.5
Fedora 28.1.1
OpenSUSE 42.3
Ubuntu 18.04
pfSense 2.4.3
Red Hat Enterprise 7.5
Android x86 8.1_rc2
MF06 BIOS A01 Release Date 2021-6-19
Description First Release for Production.
Download  BAT6NA01.zip
Flash Instructions for UEFI 1. Unzip the file and copy to the USB flash drive with FAT32 format.
2. Insert the USB drive, Enter BIOS, and select "Built-in EFI Shell" from Boot Override.
3. Type fs0: to change path when you see Shell prompt.
4. Type *.NSH to auto update BIOS.
5. Power off the system after the update finished.
* Read Detailed Instructions in PDF
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.

Drivers for MF06
  Windows 10 (64 bit)
Chipset  inf.zip
Graphic  gfx.zip
Sound  audio.zip
LAN  intellan.zip
Serial IO  SIO.zip
ISH  ish.zip
TXE  txe.zip
iRMT  iRMT.zip
1.0  G03-MF06-F.pdf
Power Consumption Report  Reports available upon request
Temperature Test Report  Reports available upon request
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux