| Model Series | MT95 |
| Part Number | MT95-90 |
| Form Factor | uTX Form Factor (117mm x 112mm) |
| Processor | Intel® Atom x5 E3940 Quad Core 1.60 GHz - 1.80 GHz, 9.5W TDP
* No heatsink included, heatsink/cooler required for bench testing |
| Memory | 1 x 204-pin DDR3L-1866 SO-DIMM Non-ECC up to 8GB (1.35V required) |
| Graphics | Intel HD Graphics 500, 400MHz - 600MHz (E3940) |
| Audio | Realtek ALC662 HD Audio Codec |
| LAN | 2 x Intel® I210-IT Gigabit LAN |
| Storage | 1 x SATA3 6Gb/s Connector
1 x M.2 SATA M-key 2242 length
Onboard 32GB eMMC |
| Super IO | FINTEK F81962D |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v2.0 |
| Back Panel Connectors |
1 3.5mm Line out / MIC in Combo Jack
2 RJ45 LAN (10/100/1000)
2 USB 3.2 (Gen 1 5Gbps)
2 HDMI 1.4b (3840 x 2160 @ 30Hz)
1 RJ45 Type Serial Port
1 +12V 2.5mm Locking DC-In Power Jack
|
| Front Panel Connectors |
1 Power Button
2 LAN1 / LAN2 LED
2 Power LED / HDD LED
1 AT / ATX Mode Switch
2 USB 3.2 (Gen 1 5Gbps)
|
| Onboard I/O Connectors |
1 SATA3 6Gb/s Connector
1 M.2 SATA 2242 M Key
1 M.2 3042 B Key (USB 3.0) with Micro SIM Holder for 3G/4G
1 M.2 2230 E Key (USB 2.0 / PCIe x1) for WiFi
1 8 bit GPIO Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 4-pin SATA Power Output (Male)
|
| Power Supply for MT95 |
|
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.
|
| Market Segments Supported |
√ Industrial PC
√ Factory Automation
√ Kiosk
√ IoT
|
| Environment |
Operating Temperature : -20 ~ 85°C (with Industrial Class M.2 SSD and Memory)
Storage Temperature : -20 ~ 85°C
|
