- 11th Gen Intel® Tiger Lake-UP3 SoC Processor
- Long-Life Embedded Class with Planned Lifecycle Through Q3'2035
- 2 * DDR4-3200MHz Dual Channel SO-DIMM up to 64GB
- Up to 4 * 4K HDR Displays or 1 * 8K SDR Displays (DP)
- 1 * Intel i225-V 2.5GbE, 1 * Intel i219-LM GbE
- M.2 PCIE 4.0 x4 NVME, 5 * USB 3.2 Gen2, 12-24V DC-in
- ECO-design for EuP/ErP

Specification
Model SeriesMU10
Part NumberMU10-20MU10-22
Form FactorNUC (101 x 101mm)
Processor11th Gen Intel® Core i5-1145G7E, 1.50GHz – 4.10GHz Burst, 4-Core 8-Thread, 15W TDP, vPro (Formerly Tiger Lake)
* Ships with CPU Heatsink/fan for bench testing
Memory2 x 260-pin Dual Channel DDR4-3200 SO-DIMM up to 64GB Total
GraphicsIntel® Iris® Xe Graphics
AudioRealtek ALC888S HD Audio
LAN1 x Intel I225-V PCIe 2.5GbE
1 x Intel I219-LM PHY Gigabit LAN (iAMT 12.0)
Storage1 x SATA3 6Gb/s
1 x M.2 (PCIe 4.0 x4, M-key, 2242/2280 NVMe)
Super IOFINTEK F81804U
TPMIntel fTPM 2.0 (PTT) Trusted Computing FirmwareIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard NUVOTON TPM v2.0
Back Panel Connectors
2 USB 3.2 Gen 2 (10 Gb/s) Type-C with DP 1.4 (4096 x 2304 @ 60Hz)
1 RJ45 LAN (10/100/1000)
1 SIM Card Slot
2 HDMI 2.0b (4096 x 2160 @ 60Hz)
1 RJ45 LAN (10/100/1000/2500)
1 +12V – 24V 2.5mm Diameter DC Power Jack

Front Panel Connectors
1 USB 3.2 Gen 2 (10 Gb/s) Type-C (No DP)
1 3.5mm Line-out / Mic-in Combo Jack
2 USB 3.2 Gen 2 (10 Gb/s) Type-A

Onboard I/O Connectors
1 SATA3 6Gb/s Connector
1 M.2 M-Key, 2242/2280 (PCIe 4.0 x4 NVMe)
1 M.2 E-key, 2230 (USB and PCIe CNVi WiFi)
1 M.2 B-key, 3042/3052 (USB and PCIe for 5G LTE)
1 Serial Headers (RS232)
1 USB Pin Headers for 2 additional USB 2.0 Ports
1 8 bit GPIO Header
1 4-pin SMBUS Header
1 3-pin Fan Header
1 AT/ATX Mode Jumper
1 4-pin SATA Power Output (Male)
Power Supply for MU10
External Power Supply – the board can be powered with a +12 - 24V external power supply though a DC connector on the back panel. The rear +12 - 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 - 24V and the shell is GND. A minimum of 90 Watts power adapter is recommended.
Market Segments Supported
√ Industrial PC
√ Factory Automation
√ Retail (POS/Kiosk/ATM/Digital Signage)
√ Digital Security / Surveillance
√ Panel PC
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
Ordering Info
Part Number Description
MU10-20 Embedded i5-1145G7E 3.5" SBC
MU10-22 Embedded i5-1145G7E 3.5" SBC with onboard TPM 2.0
MU10-90 Non-embedded i5-1135G7 3.5" SBC
MU10-92 Non-embedded i5-1135G7 3.5" SBC with onboard TPM 2.0
G01-SATAL-RD30-F (Incl) L-type SATA cable
G01-XH4-SA15-35F (Incl) SATA power cable
G01-COM-H2M22-1F (Incl) COM cable
OS Support List
Windows Linux
Windows 10 64bit CentOS 8.2_2004
Win 10 IoT Enterprise 64-bit RedHat 8.2
Windows 11 64bit Fedora 33.1.2
Win 11 IoT Enterprise 64-bit OpenSUSE 15.2
Ubuntu 20.04.1
Downloads
MU10 w/fan BIOS A03 (Default Intel PTT) Release Date 2023-3-17
Description 1. Add PCIe Wakeup Options.
2. Update USB Type-C Compatibility.
Download  MU1AVA03.zip
Flash Instructions for UEFI 1. Unzip the file and copy to the USB flash drive with FAT32 format.
2. Insert the USB drive, Enter BIOS, and select "Built-in EFI Shell" from Boot Override.
3. Type fs0: to change path when you see Shell prompt. Might be fs1: if you have more than one drive.
4. Type *.NSH to auto update BIOS.
5. Power off the system after the update finished.
* Read Detailed Instructions in PDF
Revised History [A02]. Fix DMIEDIT not working.
[A01]. Initial BIOS. Turbo Enabled.
MU10 fanless BIOS B03 (Default Intel PTT) Release Date 2023-5-17
Description 1. Add PCIe Wakeup Options.
2. Update USB Type-C Compatibility.
Download  MU1AVB03.zip
Flash Instructions for UEFI 1. Unzip the file and copy to the USB flash drive with FAT32 format.
2. Insert the USB drive, Enter BIOS, and select "Built-in EFI Shell" from Boot Override.
3. Type fs0: to change path when you see Shell prompt. Might be fs1: if you have more than one drive.
4. Type *.NSH to auto update BIOS.
5. Power off the system after the update finished.
* Read Detailed Instructions in PDF
Revised History [B02]. Fix DMIEDIT not working.
[B01]. Initial BIOS. Turbo Disabled.
MU10-22/92 BIOS BT2 (Default dTPM) Release Date 2023-7-5
Description 1. Add PCIe Wakeup Options.
2. Update USB Type-C Compatibility.
Download  MU1AVBT2.zip
Flash Instructions for UEFI 1. Unzip the file and copy to the USB flash drive with FAT32 format.
2. Insert the USB drive, Enter BIOS, and select "Built-in EFI Shell" from Boot Override.
3. Type fs0: to change path when you see Shell prompt. Might be fs1: if you have more than one drive.
4. Type *.NSH to auto update BIOS.
5. Power off the system after the update finished.
* Read Detailed Instructions in PDF
Revised History [BT1]. Initial BIOS. Turbo Disabled.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for MU10
  Windows 10 (64 bit) Windows 11 (64 bit)
Chipset  inf_tgl.zip  inf_tgl_w11.zip
Graphic  gfx_tgl.zip  gfx_tgl_w11.zip
Sound  audio_tgl.zip  audio_tgl.zip
LAN  intellan_tgl.zip  intellan_tgl_w11.zip
RST  rst_tgl.zip  rst_tgl_w11.zip
ME  ime_tgl.zip  ime_tgl_w11.zip
SIO  sio_tgl.zip  sio_tgl.zip
Manual
1.0  G03-MU10-F.pdf
Resources
FCC  FCC
CE  CE
LVD  LVD
RoHS  RoHS
Power Consumption Report  Reports available upon request
Temperature Test Report  Reports available upon request
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux