- Intel Celeron Braswell N3160 SoC Processor
- Embedded Long-life Series, Lifecycle through Q1'2031
- Supports HDMI, DVI-D, LVDS 3 Independent Display
- Dual Intel Gigabit LAN with Enhanced Surge Protection
- Supports 1 * M.2 SATA and 1 * SATA3 6Gb/s
- ECO-design for EuP/ErP

Specification
Model SeriesNF596i
Part NumberJNF596i-3160
Form FactorMini-ITX (170 * 170mm)
ProcessorFanless Intel® Celeron N3160 SoC, 1.60GHz – 2.24GHz Burst, Quad-Core, 6W TDP/4W SDP, with AES-NI support
Memory1 x 204-pin SODIMM DDR3L-1600 Dual Channel 1.35V required (up to 8 GB)
* 1600MHz memory will run at 1600MHz
* 1333MHz memory will run at 1066MHz
* 1066MHz memory not supported
GraphicsIntel HD Graphics, 320MHz - 640MHz
AudioC-Media HS-100B USB Audio
LAN2 x Intel I211-AT Gigabit LAN
Storage1 x SATA3 6Gb/s Connectors
1 x M.2 SATA M-key 2242
Super IOFINTEK F81866A
Back Panel Connectors
1 +12V 2.5MM Diameter DC Power Jack
1 DVI-D (2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
1 HDMI 1.4b (2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
2 Serial port (1 * RS232/422/485, 1 * RS232)
2 RJ45 LAN (10/100/1000)
4 USB 3.0
1 3.5mm Audio Jacks (Line Out & Mic In)

Onboard I/O Connectors
1 PCI Express x1 Slot
1 M.2 SATA M-key 2242
1 Full size mini PCI-E Slot
1 SATA3 6Gb/s Connectors
2 USB 2.0 Pin Headers for up to 3 additional USB 2.0 Ports
4 Serial Port Headers (RS232, +5V/+12V)
1 24-bits Dual Channel LVDS connector/Inverter
1 GPIO header
1 Chassis Intrusion header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 9-pin Audio header (Line Out & MIC)
2 2-pin LAN LED header
1 5-pin SMBUS header
1 Front Panel header
3 Fan headers
1 SIM Card Socket
1 4-pin Power Output (Male)
1 2-pin +12V Alternate Power connector (Molex 5566-2)
Power Supply for NF596i
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +12 VDC.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 1 x 2 power connector is to be used.
Market Segments Supported
√ Digital Signage
√ Panel PC
√ Industrial Automation/Control
√ All-In-One
√ Retail (POS/Kiosk/ATM)
√ Casino Gaming
√ Thin Client
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
Ordering Info
Part Number Description
JNF596i-3160 Mini-ITX motherboard with Celeron N3160 Quad Core Braswell Processor
F04-MB-044-F IO shield for JNF596i
G01-SATA-BK-B-2F (Incl) SATA cable
G01-COM9-30A-F (Incl) COM cable 30cm
G01-PW4PS-2S-32F (Incl) Y power cable
OS Support List
Windows Linux
Windows 7 32bit/64bit (USB3.0 driver preload required) CentOS 7.0
Windows 8.1 32bit/64bit (USB3.0 driver preload required) Debian 8.8
Windows 10 32bit/64bit Fedora 25.13
Windows Embedded 7 SP1 32bit/64bit openSUSE 42.3
Windows Embedded 8.1 32bit/64bit Ubuntu 16.10
POSready 7 32bit/64bit pfSense 2.3.2
Windows Server 2008R2 64bit RedHat 7.3
Windows Server 2012R2 64bit
Windows Server 2016 64bit
Windows 10 IoT Enterprise 64bit
Downloads
NF596i-3160 BIOS A01 Release Date 2021-8-25
Description First Release.
Download  BASFNA01.zip
Flash Instructions 1. Prepare a MS-DOS bootable flash drive.
2. Download the zip file.
3. Unzip the file and copy to the flash drive.
4. Power-on the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt.
5. Power-off the PC when the update finished.
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for NF596i
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit) Windows 10 (64 bit)
Chipset  inf_28.zip  inf_28.zip  inf_28.zip
Video  32 bit / 64 bit  32 bit / 64 bit  64 bit
Audio  No Driver required  No Driver required  No Driver required
LAN  intellan_28.zip  intellan_28.zip  intellan_28.zip
USB 3.0  win7.zip  Win81.zip  win10.zip
TXE  txe_28.zip  txe_28.zip  txe_28.zip
TPM 2.0  tpm_hotfix.rar  tpm_hotfix.rar  tpm_hotfix.rar
iRMT  NA  irmt_28.zip  irmt_28.zip
Manual
2.0  G03-NF596I-F.pdf
Resources
FCC  FCC
CE  CE
RoHS  RoHS
Power Consumption Report  Power Consumption Report
Temperature Test Report  Temperature Test Report
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux