- Intel Celeron N2930 SoC Processor
- Embedded Long-life Series, Lifecycle through Q1'2029
- Ultra slim, low-power, thin form factor design (board z-height is 20mm)
- Intel Gigabit LAN and M.2 SATA 2242
- Built-in Wide Range +9V – 36V DC-In
- ECO-design for EuP/ErP

Specification
Model SeriesNF9Mi
Part NumberJNF9Mi-2930
Form FactorMini-ITX (170 * 170mm)
ProcessorIntel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
Memory2 x 204-pin SODIMM DDR3L-1333 Single Channel (up to 8 GB)
GraphicsIntel HD Graphics, 313MHz - 854MHz
AudioC-Media HS-100B USB Audio
LAN1 x Intel I211-AT Gigabit LAN
Storage2 x SATA2 3Gb/s Connectors
1 x M.2 SATA M-key 2242 (shares with one SATA)
Super IOFINTEK F81866A
Back Panel Connectors
1 +9V ~ +36V DC-in jack
1 USB 3.0
1 DVI-I
1 COM port (RS232/422/485)
1 RJ45 LAN (10/100/1000)
3 USB 2.0
1 3.5mm Audio Jacks (Line Out)

Onboard I/O Connectors
1 PCI Express x1 Slot
1 M.2 SATA M-key 2242 (shares with one SATA)
1 Full size mini PCI-E Slot (pairs with SIM)
2 SATA2 3Gb/s Connectors
1 USB 3.0 Pin Headers for up to 2 additional USB 3.0 Ports
1 USB 2.0 Pin Headers for up to 2 additional USB 2.0 Ports
3 Serial Port Headers (RS232, +5V/+12V)
1 24-bits Dual Channel LVDS connector/Inverter
1 GPIO header
1 Chassis Intrusion header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Parallel header
1 9-pin Audio header
1 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 Front Panel header
3 Fan headers
1 SIM Card Socket
1 4-pin Power Output (Male)
1 2-pin +9V ~ +36V Alternate Power connector (Molex 5566-2)
Power Supply for NF9Mi
External Power Supply – the board can be powered with a +9V ~ +36V external power supply though a DC connector on the back panel. The rear +9V ~ +36V VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +36V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +36V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +9 ~ +36 VDC.

Caution: There is no isolation circuitry between the external +9V ~ +36V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +36V DC jack is covered if the internal 1 x 2 power connector is to be used.
Market Segments Supported
√ Digital Signage
√ Panel PC
√ Industrial Automation/Control
√ All-In-One
√ Retail (POS/Kiosk/ATM)
√ Casino Gaming
√ Thin Client
Environment
Operating Temperature : -20 ~ 70°C
Storage Temperature : -20 ~ 85°C
Ordering Info
Part Number Description
JNF9Mi-2930 Mini-ITX motherboard with Celeron N2930 Quad Core Bay Trail Processor
F04-MB-024-F IO shield for JNF9Mi
F04-MB-025-F Thin IO shield for JNF9Mi
G01-SATA-BK-B-F (Incl) SATA2 cable
G01-COM9-30A-F (Incl) COM cable 30cm
G01-PW4PS-2S-32F (Incl) Y power cable
G01-DVI-VGA-BK-F (Incl) DVI to VGA adapter
OS Support List
Windows Linux
Windows 7 32bit/64bit CentOS 7_1804
Windows 8.1 32bit/64bit Debian 7.6
Windows 10 32bit/64bit Fedora 20
Windows 10 IoT Enterprise 64bit openSUSE 42.3
POSready 7 32bit/64bit Ubuntu 14.04
Windows Embedded Standard 7 32bit/64bit pfSense 2.2
Windows Embedded Standard 8 32bit/64bit RedHat 7.5
Android 4.4.2_r1-ia2
Downloads
NF9Mi-2930 BIOS A01 Release Date 2021-8-13
Description First Release.
Download  BF9MIA01.zip
Installation Instructions 1. Prepare a MS-DOS bootable flash drive.
2. Download the zip file.
3. Unzip the file and copy to the flash drive.
4. Reboot the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for NF9Mi
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit) Windows 10 (64 bit)
Chipset  inf.zip  inf.zip  inf.zip
Video  7_32_bit / 7_64_bit  8_32_bit / 8_64_bit  10_64_bit
Audio  No Driver required  No Driver required  No Driver required
LAN  intellan_20.zip  intellan_20.zip  intellan_20.zip
USB 3.0  usb30.zip Built-In Built-In
TXE (Trusted Execution Engine)  txe_20.zip  txe_20.zip  txe_20.zip
Asmedia USB 3.0  asmediausb30.zip  asmediausb30.zip  asmediausb30.zip
Manual
5.0  G03-NF9MI-F.pdf
Resources
FCC  FCC
CE  CE
RoHS  NF9M-2930
Power Consumption Report  Reports available upon request
Temperature Test Report  Reports available upon request
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux