| Model Name | NP891P |
| Part Number | JNP891P-4125 | JNP891P32-4125 (32GB eMMC)
JNP891P64-4125 (64GB eMMC) |
| Form Factor | 2.5" Pico-ITX (100 x 72mm) |
| Processor | Intel® Celeron J4125 Processor Quad Core 2.00 GHz - 2.70 GHz, 10W TDP
* Ships with silver flat heatsink for direct attaching to surface |
| Memory | 1 * 260-pin DDR4-2400 up to 8GB Total |
| Graphics | Intel HD Graphics 600, 250MHz - 750MHz |
| Audio | Realtek ALC888 HD Audio |
| LAN | 1 x Realtek RTL8111H Gigabit LAN |
| Storage | 1 x M.2 Slot (M-key, 2242 SATA only)
1 x SATA3 6Gb/s Connector | 32/64GB eMMC
1 x M.2 Slot (M-key, 2242 SATA only)
1 x SATA3 6Gb/s Connector |
| Super IO | FINTEK F81804U |
| TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware |
| Back Panel Connectors |
1 RJ-45 ports (10/100/1000)
2 HDMI 2.0 (4096 x 2160 @ 60Hz)
1 Micro SIM Card Slot
2 USB 3.0 ports
1 12V DC-in jack
|
| Onboard I/O Connectors |
1 M.2 Slot (M-key, 2242 SATA only)
1 Full Size Mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 USB Pin Header (2.0 mm pitch) for up to 2 additional USB 2.0 Ports
1 Serial Port Headers (2.0 mm pitch) (RS232)
1 40-pin eDP (4096 x 2304 @ 60Hz)
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 4-pin SMBUS Header
1 9-pin HD Audio Header
1 9-pin Front Panel Connector
1 4-pin Power-out Connector for 2.5" HDD/SSD
|
| Power Supply for NP891P |
|
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
| Environment |
Operating Temperature : 0 ~ 50°C
Storage Temperature : -20 ~ 85°C
|
