- INTEL® Bay Trail-M N2930 / N2807 SoC Processor
- Embedded Long-life Series, Planned Lifecycle Through Q1'2029
- Pico-ITX Form Factor (100mm X 72mm) Design for Fanless Systems
- 12V DC jack on back panel for external power supply
- Built-in DDR3L-1333-2GB RAM
- ECO-design for EuP/ErP

Model NameNP93
Part NumberJNP93-2930
Form Factor2.5" Pico-ITX (100 x 72mm)
ProcessorFanless INTEL® Bay Trail-M Celeron N2930 SoC Processor 1.83GHz, Quad-Core, 7.5W
Fanless INTEL® Bay Trail-M Celeron N2807 SoC Processor 1.58GHz, Dual-Core, 4.3W
* Low-profile Heatsink Installed for Basic Bench Testing
MemoryOnboard 2GB DDR3L-1333, non-expandable
GraphicsIntel® HD Graphics
AudioRealtek ALC662 HD Audio
Realtek ALC888 HD Audio (Manufacturered after March 2021)
LAN1 x Realtek RTL8111G Gigabit Ethernet
1 x Realtek RTL8111H Gigabit Ethernet (Manufacturered after March 2021)
Storage1 x full size mSATA Slot
1 x SATA2 3Gb/s Connector
Super IOFINTEK F81803U
Form FactorPico-ITX Form Factor (100mm X 72mm)
Back Panel Connectors
1 RJ-45 ports (10/100/1000)
1 USB 3.0 port
1 USB 2.0 port
1 12V DC-in jack

Onboard I/O Connectors
1 Full size mSATA Slot
1 Half size mini PCI-E Slot
1 SATA2 3Gb/s Connector
3 USB Pin Headers (2.0 mm pitch) for up to 6 additional USB 2.0 Ports
2 Serial Port Headers (2.0 mm pitch) (1 * RS232, 1 * RS232/422/485)
1 AT/ATX Mode Select Jumper
1 24-bit Dual Channel LVDS/Inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 9-pin Front Audio Header
1 9-pin Front Panel Connector
1 2-pin LAN LED Header
1 4-pin LVDS 5V/3.3V/12V Select Jumper
1 3-pin Inverter 5V/12V Select Jumper
1 4-pin Power-out Connector (Male) for 2.5" HDD
Power Supply for NP93
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12V and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
Operating Temperature : 0 ~ 40°C
Storage Temperature : -20 ~ 85°C
Ordering Info
Part Number Description
JNP93-2930 Pico-ITX form factor motherboard with Intel N2930 and heatsink
JNP93-2807 Pico-ITX form factor motherboard with Intel N2807 and heatsink
G01-SATA-BK-B-F (Incl) SATA cable
G01-COM-H2M30-F (Incl) 30cm 2.0mm pitch com cable
G01-PW4PS-2S-32F (Incl) Y power cable
G03-NP93-F (Incl) Manual
OS Support List
Windows Linux
Windows 7 32bit/64bit CentOS 6.5
Windows 8 32bit/64bit Debian 7.6
Windows 8.1 32bit/64bit Fedora 20
Windows 10 32bit/64bit openSUSE 13.1
Windows Server 2012R2 64bit Ubuntu 14.04
Windows Embedded Standard 7 32bit/64bit pfSense 2.2
Windows Embedded Standard 8 32bit/64bit RedHat 7.0
POSready 7 32bit/64bit Android 4.4.2_r1-ia2
NP93-2807/2930 BIOS A11 Release Date 2021-4-9
Description 1. Support ALC888 and RTL8111H.
2. Add Beep Code on Boot.
Download  BAR3AA11.zip (for DOS)
Installation Instructions for DOS 1. Prepare a MS-DOS bootable USB flash drive.
2. Download the zip file.
3. Unzip the file and copy to the USB flash drive.
4. Reboot the PC into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A10]. Update CPU microcode for new DRAM modules. (J1 pin6-8 closed to disable ME)
[A09]. Update CPU microcode and TXE.
[A08]. Support ADMPETPMB TPM add-on card.
[A07]. Add "Linux" in OS Select.
[A06]. Change registers for SuperIO to improve system stability.
[A05]. Modify RTC alarm e-Module.
[A04]. 1.Add Boot Display Item. 2.Modify Watchdog Wake-up Timer.
[A03]. 1.Update CPU uCode. 2.Update MRC. 3.Update VGA BIOS.
[A02]. Update CPU uCode.
[A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.

Drivers for NP93
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit) Windows 10 (32/64 bit)
Chipset  inf.zip  inf.zip  inf.zip
Video  7_32_bit / 7_64_bit  81_32_bit / 81_64_bit  10_32_bit / 10_64_bit
Audio  audio.zip  audio.zip  audio.zip
LAN  rtllan.zip  rtllan.zip  rtllan.zip
USB 3.0  usb30.zip Built-In Built-In
TXE (Trusted Execution Engine)  w7.zip  w8_32bit / w8_64bit  w10.zip
MBI NA  w8.zip  w10.zip
3.0  G03-NP93-F.pdf
Power Consumption Report  Power Consumption Report for N2930
 Power Consumption Report for N2807
Temperature Test Report  Temperature Test Report
Watchdog sample code  Watchdog sample code