Model Name | NU792V |
Part Number | JNU792V2S-3865U & JNU792V2S-3965U (TPM 2.0) JNU792VS-3865U & JNU792VS-3965U |
Form Factor | UTX Form Factor (117mm x 112mm) |
Processor | Intel® Celeron 3965U/3865U Dual-Core SoC Processor, Kaby Lake-U, 15W TDP * No CPU heatsink included, requires a heatsink/thermal solution for bench testing |
Memory | 2 * 260-pin SO-DIMM Slot DDR4-2133 up to 32GB Total |
Graphics | Intel HD Graphics |
Audio | Realtek HD Audio |
LAN | 1 * Intel i219-LM PHY Gigabit LAN 1 * Intel i211-AT PCI-E Gigabit LAN |
Storage | 1 * Full Size mSATA/Mini PCIE Slot 1 * SATA3 6Gb/s Connector |
Super IO | FINTEK F81803U |
TPM | Intel fTPM 2.0 (PTT) Trusted Computing Firmware Onboard TPM v2.0 for JNU792V2S |
Back Panel Connectors |
1 +12V 2.5mm Diameter DC Power Jack
1 HDMI (4096 * 2304 @ 24Hz)
2 USB 3.0 Ports
2 USB 2.0 Ports
2 RJ-45 LAN Ports
1 Line-out/Mic Combo Jack
1 Line-in Jack
|
Front Panel Connectors |
1 On/Off Power Button
1 HDD LED
1 Power LED
1 SIM Slot
1 VGA Port
2 USB 2.0 Ports
2 USB 3.0 Ports
|
Onboard I/O Connectors |
1 Full size mSATA / Mini PCI-E Shared Slot
1 Half size Mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 USB Header (2.0 mm pitch) for up to 1 additional USB 2.0 Ports
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 4-pin Speaker Header for 3W Amplifier L+R
1 3-pin Fan Connector
2 2-pin LAN LED
1 4-pin Power-out Connector (Male) for 2.5" HDD
|
Power Supply for NU792V |
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
|
Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
Environment |
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
|