- Intel Celeron N2930 SoC Processor
- Long-Life Embedded Class with Planned Lifecycle Through Q1’2029
- A Successor to NF9T, a seamless transition with same IO Layout
- Supports up to 2 Display, HDMI, VGA, eDP or LVDS
- Gigabit LAN, 3 * M.2, 8 * USBs, 5 * COMs
- Built-in 12V DC Power Input, SIM Slot, PCI-E x1
- ECO-design for EuP/ErP

Model NameMI97
Part NumberMI97-30MI97-32
Form FactorMini ITX (170 x 170mm)
ProcessorIntel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP
Memory1 x 204-pin DDR3L-1333 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics, 313MHz - 854MHz
AudioRealtek ALC662 HD Audio
Realtek ALC888 HD Audio (Manufacturered after April 2021)
LAN1 x Intel I211-AT PCI-E Gigabit LAN
Storage1 x SATA2 3Gb/s Connector
1 x M.2 SATA M-key 2242/2280 length
Super IOFINTEK F81966D
TPMIntel fTPM 2.0 (PTT) Trusted Computing FirmwareIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard NUVOTON TPM v2.0
Back Panel Connectors
1 +12V 2.5mm Diameter DC Power Jack
1 HDMI (1920 * 1200 @ 60Hz)
1 VGA (1920 * 1080 @ 60Hz)
1 Parallel
3 USB 2.0
1 PS2 Mouse/Keyboard Combo
2 Serial Ports (1 * RS232, 1 * RS232/422/485)
1 RJ45 LAN (10/100/1000)
1 USB 3.0
2 3.5mm Audio Jack (Line Out & MIC In)

Onboard I/O Connectors
1 PCI-E x1 Slot
1 SATA2 3Gb/s Connector
1 M.2 M-Key, 2242/2280, SATA
1 M.2 E-key, 2230, for WiFi (USB 2.0/PCIE x1)
1 M.2 B-Key, 3042, with SIM Slot (USB 2.0)
3 Serial Headers (RS232)
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 40-pin eDP (2560 * 1600 @ 60Hz) OR 24-bits Dual Channel LVDS/Inverter (1920 * 1200 @ 60Hz)
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 9-pin Front Audio Header
1 5-pin SMBUS Header
1 4-pin Fan Header
1 4-pin SATA Power Output (Male)
1 2-pin +12V Alternate DC-in (Mating plug: Molex 5557-02R)
Power Supply for MI97
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Industrial PC
√ Factory Automation
√ Retail (POS/Kiosk/ATM)
√ Panel PC
√ IoT
Operating Temperature : 0 ~ 60°C
Storage Temperature : -40 ~ 70°C
Humidity: 10% ~ 90% RH @40°C (non-condensing)
Ordering Info
Part Number Description
MI97-30 Mini ITX motherboard with N2930
MI97-32 Mini ITX motherboard with N2930 and TPM 2.0
MI97-30UT Mini ITX motherboard with N2930 and SATA data & power cables
F04-MB-020-1F (Incl) IO shield
OS Support List
Windows Linux
Windows 7 32bit/64bit CentOS 7_1804
Windows 8.1 32bit/64bit Debian 7.6
Windows 10 32bit/64bit Fedora 20
Windows 10 IoT Enterprise 64bit openSUSE 42.3
POSready 7 32bit/64bit Ubuntu 14.04
Windows Embedded Standard 7 32bit/64bit pfSense 2.2
Windows Embedded Standard 8 32bit/64bit RedHat 7.5
Android 4.4.2_r1-ia2
MI97 BIOS A03 Release Date 2022-5-31
Description Update RS485 Mode.
Download  BAM9FA03.zip
Flash Instructions for DOS 1. Prepare a MS-DOS bootable flash drive.
2. Download the zip file.
3. Unzip the file and copy to the flash drive.
4. Reboot the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt.
5. Wait until the update finished and power off the system.
Revised History [A02]. 1.Support ALC888 Audio. 2.Add Beep Code on Boot.
[A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.

Drivers for MI97
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit) Windows 10 (32/64 bit)
Chipset  inf.zip  inf.zip  inf.zip
Video  7_32_bit / 7_64_bit  8_32_bit / 8_64_bit  10_32_bit / 10_64_bit
Audio  audio.zip  audio.zip  audio.zip
LAN  intellan_20.zip  intellan_20.zip  intellan_20.zip
USB 3.0  usb30.zip Built-In Built-In
TXE (Trusted Execution Engine)  txe.zip  txe.zip  txe.zip
1.0  G03-MI97-F.pdf
Power Consumption Report  Reports available upon request
Temperature Test Report  Reports available upon request
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux