| Model No. | NF531D4-3160/3150 |
| Part No. | JNF531D4-3160/3150 |
| Jetway NF531 3.5" SBC Motherboard |
| Processor | Fanless Intel® Celeron N3160 SoC, 1.60GHz – 2.24GHz Burst, Quad-Core, 6W TDP/4W SDP, with AES-NI support
Fanless Intel® Celeron N3150 SoC, 1.60GHz – 2.08GHz Burst, Quad-Core, 6W TDP/4W SDP, with AES-NI support
* Ships with passive heatsink installed for bench testing |
| Memory | Onboard 4GB DDR3L-1600, non-expandable |
| Graphics | Intel HD Graphics |
| Audio | Realtek ALC662 HD Audio codec |
| LAN | 2 x Intel I211-AT Gigabit LAN |
| Storage | 1 x M.2 slot (M-key, 2242 SATA only)
1 x SATA3 6Gb/s Connector |
| Super IO | FINTEK F81866A |
| Back Panel Connectors |
1 RJ45 Type Serial port
2 RJ45 LAN (10/100/1000)
4 USB 3.0
1 Display Port 1.1 (2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
1 HDMI 1.4b (2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
1 +9V ~ +36V 2.5mm Diameter Locking DC Power Jack
|
| Onboard I/O Connectors |
1 M.2 Slot (M key or B+M key, Type 2242 SATA SSD only)
1 SATA3 6Gb/s Connector
1 Mini-PCI Express Slot (full-size)
5 Serial Headers (4 * RS232, 1 * RS232/422/485)
1 24-bits Dual Channel LVDS Connector/Inverter
1 USB Pin Header for up to 2 additional USB 2.0 Ports
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 Front Reset/Power buttons
1 10-pin GPIO Header
2 2-pin LAN LED Header
1 9-pin Audio Header (Line-out, Mic)
1 4-pin Fan Header
1 4-pin SATA Power Output (Male)
|
| Power Supply for NF531 |
External Power Supply – the board can be powered with a +9V ~ +36V external power supply though a DC connector on the back panel. The rear +9V ~ +36V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +36V and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|
