- Intel Skylake-U / Kaby Lake-U 15W Processors
- UTX Form Factor (117mm x 112mm) Design for Fanless Systems
- 2 * Intel Gigabit LAN, HDMI 4K @24Hz, DisplayPort 4K @60Hz
- 6 * USB 3.0 Ports, 5 * USB 2.0 Ports, 12V DC-in
- ECO-design for EuP/ErP

Model NameNU792C
Part NumberJNU792C2S-7100U & JNU792C2S-6100U (TPM 2.0)
JNU792CS-7100U & JNU792CS-6100U
Form FactorUTX Form Factor (117mm x 112mm)
ProcessorIntel® Core i3-7100U Dual-Core SoC Processor, 2C/4T, 15W TDP
* No CPU heatsink included, requires a heatsink/thermal solution for bench testing
Memory2 * 260-pin SO-DIMM Slot DDR4-2133 up to 32GB Total
GraphicsIntel HD Graphics
AudioRealtek HD Audio
LAN1 * Intel i219-LM PHY Gigabit LAN
1 * Intel i211-AT PCI-E Gigabit LAN
Storage1 * Full Size mSATA/Mini PCIE Slot
1 * SATA3 6Gb/s Connector
Super IOFINTEK F81803U
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard TPM v2.0 for JNU792C2S
Form FactorUTX Form Factor (117mm x 112mm)
Back Panel Connectors
1 +12V 2.5mm Diameter DC Power Jack
1 DisplayPort (4096 * 2304 @ 60Hz)
1 HDMI (4096 * 2304 @ 24Hz)
4 USB 3.0 Ports
2 RJ-45 LAN Ports
1 Line-out/Mic Combo Jack
1 Line-in Jack

Front Panel Connectors
1 On/Off Power Button
1 Power LED
1 SIM Slot
1 Serial (RS232/422/485)
2 USB 2.0 Ports
2 USB 3.0 Ports

Onboard I/O Connectors
1 Full size mSATA / Mini PCI-E Shared Slot
1 Half size Mini PCI-E Slot
1 SATA3 6Gb/s Connector
2 USB Header (2.0 mm pitch) for up to 3 additional USB 2.0 Ports
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 4-pin Speaker Header for 3W Amplifier L+R
1 3-pin Fan Connector
2 2-pin LAN LED
1 4-pin Power-out Connector (Male) for 2.5" HDD
Power Supply for NU792C
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
Ordering Info
Part Number Description
JNU792C2S-7100U Core i3-7100U motherboard with TPM 2.0 and without heatsink/fan
JNU792C2S-6100U Core i3-7100U motherboard with TPM 2.0 and without heatsink/fan
JNU792CS-7100U Core i3-7100U motherboard without heatsink/fan
JNU792CS-6100U Core i3-6100U motherboard without heatsink/fan
G01-SATAL-RD30-F (Incl) L-type SATA cable
G01-XH4-SA15-30F (Incl) SATA power cable
OS Support List
Windows Linux
Windows 10 64bit Fedora 25.13
Win 10 IoT Enterprise 64-bit Ubuntu 16.10
pfSense 2.3.2
NU792C BIOS A03 Release Date 2022-10-27
Description 1. Update Microcode.
2. Support ALC888S Audio.
Download  N72CPA03.zip
Installation Instructions for DOS 1. Prepare a MS-DOS bootable USB flash drive.
2. Download the zip file.
3. Unzip the file and copy to the USB flash drive.
4. Reboot the PC into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A02]. 1.Update Microcode for INTEL SA-00233. 2.Disable Turbo Mode by Default.
[A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.

Drivers for NU792C
  Windows 10 (64 bit)
Chipset  inf.zip
Graphic  gfx.zip
Sound  audio.zip
LAN  intellan.zip
ME  ime.zip
iRMT  irmt.zip
Motherboard Manual  G03-NU792-F.pdf
Power Consumption Report  Power Consumption Report
Temperature Test Report  Temperature Test Report
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux